Goldilocks measures and compares sex toys, and we write about them plainly. It's a site for adults. Are you 18 or over?
Your answer lasts until you close the tab. Nothing is stored, and there's no account to make.
It's 7.4″ around at its widest; every pour one of a kind.
Size Medium
Sold through, 2 past pours
Links can earn us a commission, never a ranking. How the money works
maker-published figures
Own a toy you like? Name it and every drawing shows it behind this one.
The Medium is 7.4″ around over 6.3″ usable, a girth-to-length ratio of 1.18. Owners short on depth filter for 1.3 or higher; this one sits under it.
Ultra soft to soft on our five-step scale, across 2 Pleasure Forge labels.
No owner has filed a squish report on a Pleasure Forge label yet. At 3 we start printing what they found next to what the maker claims — one pour isn't a finding. File one →
How Pleasure Forge's firmness reads →
See how this sits against every other maker →
No owner has measured or reviewed it here yet. Measured yours? Add the figures.
Lowest published price across this sculpt's pours, in USD, on every day we logged one. 38 days, 36 observations (n=36).
$70 was the cheapest listed price, any size or pour, on 1 November 2026. Unchanged since we started watching.
3 of those days had nothing on the shelf — the price was published, not payable.Prices are the maker's own, read daily in USD; 2 pours feed the line.
No restock interval yet. We've watched no restocks on this sculpt, and it takes 2 before a gap between two of them means anything.
Counted from our own daily log of the maker's listings — one row per listing per check, so a flat line means we looked and nothing moved. Days before we started tracking aren't counted, and days nobody checked aren't guessed at.
Tracking prices since 25 September 2026 — 38 days so far.
| Maker says maker-published | Owners measured community-measured | |
|---|---|---|
| Usable length | 6.3″ | no owner measurements yet |
| Total length | 7.4″ | no owner measurements yet |
| Widest girth | 7.4″ | no owner measurements yet |
| Narrowest girth | 3.4″ | no owner measurements yet |
Left column is the maker's own published figure, re-read daily. Right column is owners' calipers — n is how many, and ✓ lands at three independent measurements agreeing within 2mm. Nobody has measured any of these yet — measured yours? here's how →
The Medium Eastern Dragon has 6.3″ of usable length and 7.4″ around at its widest, as Pleasure Forge publish it. It measures 7.4″ tip to base, but the base doesn't go in — usable length is the number that matters.
Pleasure Forge offer it in “Soft 00-30” and “Super Soft 00-20”. On our common scale that runs Soft 00-30 → soft and Super Soft 00-20 → ultra soft, each with the source behind it on our firmness table. Size moves the answer as much as the label does: the same firmness feels firmer in a girthier size, because there's more silicone resisting you. Softer silicone also mutes texture, so if you're buying this for what the surface does, firmer keeps more of it.
Pleasure Forge advise against silicone lube. They name water-based and oil-based lube as safe. In their words: "Using silicone based lubricants with silicone based toys is not usually recommended." On the Near Clear page it is more specific and more mechanical: the material "is compatible with your favorite water and oil based lubricants, but beware that using a silicone lube may make any silicone toy swell a little bit, or a lot". Note this is a swelling claim, not a dissolving claim — different from the makers who say silicone lube destroys silicone. Makers genuinely disagree on this one, so a rule you've read on another maker's page may not hold here.
Sources: General FAQ — Pleasure ForgeNear Clear Info — Pleasure Forge
Straight from Pleasure Forge: Care instructions are printed on the back of every packing slip. New toys arrive tacky and need a thorough wash before use; everyday cleaning is warm soapy water, deep cleaning is rubbing alcohol with a mild detergent. Inspect the toy while it is still inside the bag; report undocumented flaws before opening. New toys often feel tacky — they get only a perfunctory wash before shipping and need a thorough clean to remove residual mould release. Warm soapy water, boiling, or a 1% bleach soak all work. Everyday: water with a mild detergent. Deeper clean for smells or soiling: rubbing alcohol with a mild detergent — "silicones tend to be nonpolar which limits the ability of water to clean them".
Sources: General FAQ — Pleasure ForgeNear Clear Info — Pleasure Forge
Pleasure Forge offer KÜPPŞ on some models: Double-sided suction cups sold separately, in two shapes: Flex Cups (more grip, for walls/vertical surfaces) and Pedestal Cups (more rigid, for floors/horizontal surfaces). A set is one of each. Pleasure Forge offer Per-model features (suction compatible / Vac-U-Lock / squirting tube) on some models: Pleasure Forge does not add features on request. If a model supports suction, Vac-U-Lock or a squirting tube, it is stated in that listing's text. As published on 2026-07-26 the suction-compatible models were: XS/S/M/L Fighter, S/M/L Kraken Rogue, S/M/L Kraken Wizard, XS/S/M/L Rogue, XS/S/M/L Wizard. Check the O-ring you already own before you buy.
Sources: KÜPPŞ (Double Sided Suction Cups) — Pleasure ForgeGeneral FAQ — Pleasure Forge
Stock drops — "weekly/biweekly/monthly… generally on Thursdays around 8PM EST", announced on the site, on @pleasureforge socials and by mailing list. Customs were closed as of 2026-07-26 ("WE ARE NOT TAKING CUSTOM ORDERS AT THIS TIME"). Nothing outside the current model list is made. Their own stated windows — order processing: about 2–10 business days; orders processed Mon–Fri 7AM–3PM; no expedited shipping offered. Those windows are the maker's own published figures.
Sources: General FAQ — Pleasure ForgeGeneral FAQ — Pleasure Forge
Not yet. Every number here is a figure published by Pleasure Forge. When three or more owners measure the same point and agree within 2mm, we mark it verified and show the count — nothing on this sculpt has reached that bar.
