Goldilocks measures and compares adult toys. Everything here is written in plain words, and none of it is for under-18s.
We remember your answer for this visit only — nothing is stored beyond the session, and no account is needed.
4 sizes, 5.7–8.3″ around, each drawn to scale from the maker's published figures.
Wider than the page here — scroll the chart sideways for the rest of the range. It's drawn at one fixed scale so every size stays directly comparable.
Shape traced from the maker's own cut-out, drawn from the maker's numbers — 6.5″ around at the widest point of the shaft.Sized to your screen by the card you matched.
Hold any bank card upright against the screen and drag until the outline matches it — every card is 85.6 × 54 mm.
Owners put the comfortable increment at half an inch of circumference per step up, an inch at the very most. Anything wider is where the “I sized up and regretted it” posts come from — girth is the constraint, not length.
The Small is 6.5″ around over 5.5″ usable — a girth-to-length ratio of 1.18. Owners who are short on depth filter for a ratio of 1.3 or higher — girth without the length to go with it. This one sits under it.
| Maker says maker-published | Owners measured community-measured | |
|---|---|---|
| Usable length | 5.5″ | no owner measurements yet |
| Total length | 7.0″ | no owner measurements yet |
| Widest girth | 6.5″ | no owner measurements yet |
Left column is the maker's own published figure, re-read daily. Right column is owners' calipers — n is how many, and ✓ lands at three independent measurements agreeing within 2mm. Nobody has measured any of these yet — measured yours? here's how →
Creature Feature Toyspublishes Shore 00 and Shore A values. Standard indie ladder with the Shore value in brackets after the name.
Girth beats the label. Creature Feature Toys put it plainly: "Firmness may vary slightly depending on the girth and details of each model, as well as differences from silicone manufacturing. Rarely, they may feel a bit firmer or softer than expected."1
Soft mutes texture. The softer the pour, the less of the surface you feel. It's the trade-off behind the question owners ask each other most often when a configurator makes them choose — one we read repeatedly across our own thread corpus, never from a maker. Girthy and smooth points at soft, girthy and heavily textured points at softer still, and firm is what you pick when you want the texture to land.
No owner has filed a squish report on a Creature Feature Toys label yet. At 3 we start printing what they found next to what the maker claims — one pour isn't a finding. File one →
The Mini Eros has 4.5″ of usable length and 5.7″ around at its widest, as Creature Feature Toys publish it. It measures 6.3″ tip to base, but the base doesn't go in — usable length is the number that matters.
The Small Eros has 5.5″ of usable length and 6.5″ around at its widest, as Creature Feature Toys publish it. It measures 7.0″ tip to base, but the base doesn't go in — usable length is the number that matters.
The Medium Eros has 6.5″ of usable length and 7.5″ around at its widest, as Creature Feature Toys publish it. It measures 7.8″ tip to base, but the base doesn't go in — usable length is the number that matters.
The Large Eros has 7.0″ of usable length and 8.3″ around at its widest, as Creature Feature Toys publish it. It measures 8.5″ tip to base, but the base doesn't go in — usable length is the number that matters.
Creature Feature Toys offer it in “Firm 10A”, “Medium 00-50”, “NC31”, “Soft 00-30” and “Super Soft 00-20”. On our common scale that runs Firm 10A → firm, Medium 00-50 → medium, NC31 → soft, Soft 00-30 → soft and Super Soft 00-20 → ultra soft, each with the source behind it on our firmness table. “NC31” and “Soft 00-30” land on the same soft step, and that is where the evidence puts them. NC31: community reading placement. Near Clear formulation; firms with heat/age. Size moves the answer as much as the label does — Creature Feature Toys say so themselves: "Firmness may vary slightly depending on the girth and details of each model, as well as differences from silicone manufacturing. Rarely, they may feel a bit firmer or softer than expected." Softer silicone also mutes texture, so if you're buying this for what the surface does, firmer keeps more of it.
Source — Silicone Firmness / Near Clear — Creature Feature Toys FAQ
Creature Feature Toys say silicone lube will damage it. They name water-based and oil-based lube as safe. In their words: "Do not use silicone-based lubricants. Oil-based lubricants should be fine, but we only recommend water-based lubricants for the best time! Certain materials can degrade the silicone over time, so be sure to check ingredients and spot test on the base before use." It adds a detail nobody else does: "Take care to keep your toy away from shampoos or other soaps that may contain silicone." Condoms are optional but must not be silicone-lubricated. Makers genuinely disagree on this one, so a rule you've read on another maker's page may not hold here.
Source — Toy Care — Creature Feature Toys FAQ
Straight from Creature Feature Toys: Soap and water before and after every use; boil 5–10 minutes, top-rack dishwasher, or a 10:1 water-to-bleach soak. Never boil bleach. Wash thoroughly with soap and water before and after each use — gentle antibacterial soap or a purpose-made toy cleaner. Avoid abrasives and harsh chemicals. Sanitise by boiling 5–10 minutes; use a round-edged utensil to keep the toy off the pot's bottom and sides. Dishwasher top rack is fine, if the machine is free of detergent residue.
Sources — Toy Care — Creature Feature Toys FAQSilicone Firmness / Near Clear — Creature Feature Toys FAQ
Three routes. Restock drops for ready-to-ship stock. Made to Order: pre-set colourations released periodically on a Made to Order page, sometimes with a limited extra option like drip colour. Custom: choose model, size, firmness, two colours and pour style. Complex customs (drips, extra colours, GITD, hand painting) are quoted by email in limited availability, with 72 hours to confirm and pay before the slot lapses. Their own stated windows — ready-made: "approximately 1–5 business days" to ship and custom repour after a fault: an additional 1–4 weeks. Those windows are the maker's own published figures.
Sources — Shipping Policies — Creature Feature ToysOrder Policies — Creature Feature ToysCustom & Made to Order Toys — Creature Feature Toys FAQShipping Policies — Creature Feature ToysOrder Policies — Creature Feature Toys
Not yet. Every number here is a figure published by Creature Feature Toys. When three or more owners measure the same point and agree within 2mm, we mark it verified and show the count — nothing on this sculpt has reached that bar.
Structured reviews, community measurements and spec corrections — the checks that catch a wrong number. Log in to add yours.
Reviews, measurements and corrections come from people who own the toy.
Log in to contribute or make a handle